Your name and your country’s flag, on your frame. Ten stickers, cut and printed to survive years of rain, road grit and sun without peeling or fading.
Thousands of riders have ordered theirs since 2012. Free shipping worldwide.
What you get
Every pack contains 10 personalised stickers with your name and the flag of your choice. What changes between packs is the construction, the lettering colours and the finish — not the count.
They go on frames, helmets, forks, seat posts, rims and water bottles. Most riders use two or three on the bike itself and spread the rest across everything else they own.
Looking specifically for the classic rider name-and-flag design? See our complete guide to bike name stickers and discover how to recreate the personalised identification style seen on professional race bikes.
Make your bike easier to identify and give it a clean professional look.
Which pack for your frame
Choose your pack for the finish you want: simple, elegant or professional. All three packs contain ten personalised stickers. The new BASIC has an opaque white backing and works on suitable surfaces of any colour.
BASIC: A simple finish on opaque white vinyl with rounded corners. Black lettering and a full-colour flag. PRO: A clean, minimalist and elegant finish. Clear film lets the surface show around the flag and lettering. PLUS: The professionals’ choice. Individually cut letters without surrounding film, 7 mm high: 40% taller than BASIC and PRO.
BASIC keeps its white backing visible; PRO lets the underlying surface show around the design.
PLUS has no surrounding film, for a professional finish with larger lettering.
Choose your pack for the finish you want: simple, elegant or professional. All three packs contain ten personalised stickers. The new BASIC has an opaque white backing and works on suitable surfaces of any colour.
BASIC
BASIC is printed on opaque white vinyl with rounded corners, with black lettering and a full-colour flag. All ten stickers in the pack use black lettering.
Choose BASIC for a simple finish with a visible white backing. It works on compatible surfaces of any colour.
In the pack: 10 stickers, all with black lettering.
PRO — a clean, minimalist and elegant finish
PRO is printed on clear film with an opaque white ink layer underneath the design. A clean, minimalist and elegant finish. Clear film lets the surface show around the flag and lettering.
It also comes with both lettering colours: 5 stickers with white letters and 5 with black. You’re not committing to one look at checkout — white set on the black frame, black set on the pale spare bike, the rest across helmet, forks and rims.
In the pack: 10 stickers — 5 white lettering, 5 black.
PLUS — the professionals’ choice, with bigger lettering
A different product, not just an upgrade. Every letter and every shape is cut out individually, so there’s no film surrounding the design at all.
Three things follow:
- No visible edge. Nothing frames your name. It reads as though it were painted onto the frame at the factory — the finish you see on professional team bikes.
- Especially good on matte. A printed sticker’s edge catches the light on a matte finish. With nothing around the letters, there’s no edge to catch.
- Bigger lettering. Names are cut about 40 % taller — 0.7 cm against 0.5 cm — so they read from further away.
Built on cut vinyl rated for over ten years outdoors. It’s our most durable finish.
In the pack: 10 stickers — 5 white lettering, 5 black.
Where they hold best on a frame
Three things decide whether a decal lasts: how flat the surface is, whether it flexes, and how much abuse it takes.
The top tube is the classic spot and the best one. Flat, visible from above when you’re riding, almost no impact. If you only put a sticker in one place, put it here.
The seat post and fork legs also work well — flat, protected, and readable when the bike is racked.
Avoid anywhere that flexes. Chainstays and seat stays move under load, and that movement works the adhesive loose from the edges over months. Avoid anywhere your legs or shoes make contact, and anywhere near the bottom bracket, where road spray, chain lube and degreaser all end up.
Full detail in our guide on where to put bike decals and what actually lasts.
Will they damage your frame?
No — not if it’s quality vinyl applied and removed properly. Decals sit on top of the clear coat and don’t react with paint or carbon.
The risk is almost never the sticker. It’s using a blade to remove one, or pulling it off cold and fast instead of warming it first. We cover this properly in our guide on whether stickers damage carbon frames.
How long they last
Years, not months. Every Pegatin is built from five engineered layers — a UV-blocking protective coat, pigment colour, the white base, high-performance film that won’t shrink back from its own edges, and a precision adhesive that grips hard but releases cleanly. All of it under a tenth of a millimetre thick.
That’s what separates a sticker still sharp after three summers from one that cracks and fades in a single season. The full breakdown, with diagrams, is here.
Our guarantee
If you have any issue with your stickers within a year of purchase, we replace them free of charge.
Frequently asked questions
How many stickers come in a pack? Ten, in all three packs. What changes is the construction and the lettering colours.
Can I mix black and white letters? Yes — PRO and PLUS include both, five of each.
Will they work on a matte frame? Yes. PLUS suits matte finishes best, because there’s no film edge to catch the light against the flat surface.
Can I put a regional flag, or two countries? Yes — see our guide to choosing your flag for regional flags, combined two-country designs and club logos.
Do you ship internationally? Free shipping worldwide, always.
What about a club or team order? Email hello@pegatin.com and we’ll set up a group discount. Our guide to ordering matching stickers for a club covers how to coordinate one.
One Small Detail. A Completely Different Look.
Give your road bike the personalised finishing touch inspired by professional cycling.
10 personalised Pegatins · Black + white options · Worldwide shipping included
Add your name and flag to your bike
Save 15% with code PRODECALS. Free worldwide shipping.
Create your Pegatin